Quick Links

 

You are here: Home > Products > Car Amplifier > CA-460-A

  • CA-460-A
  • CA-460-A
  • CA-460-A
  • CA-460-A
  • CA-460-A
  • CA-460-A
  • CA-460-A
  • CA-460-A
  • CA-460-A
  • CA-460-A
 
  • Car Amplifier - CA-460-A
  • Car Amplifier - CA-460-A
  • Car Amplifier - CA-460-A
  • Car Amplifier - CA-460-A
  • Car Amplifier - CA-460-A
 
CA-460-A

Suoer CA-460-A amp car stereo power amplifier bass cit class ab car amplifier audio 12v

CA-460-A

Car Amplifier

Features:

SUOER 4 Channel Amplifier 

1.MOSFET Power Supply
Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.
2.Class A/B
Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.
3.Bridgeable
Combine the channels of a 2 or 4 channel amplifier to provide a dramatic increase in power output.
4.2 Ohm Stable
2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.
5.Variable Low Pass Filter
Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.
6.Variable High Pass Filter
Variable high-pass filter gives you the ability to filter the frequencies that pass through to the full range speakers.
7.Variable Bass Boost
Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
8.High and Low Level Inputs
High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.


INQUIRE NOW

SEND ENQUIRY

  X
Submit

Specifications

Model

CA-260

CA-440

CA-460

CA-480

CA-1500D

Output channel

2 Channel

4 Channel 4 Channel

4 Channel

Mono

Output channel

Class AB

Class AB Class AB

Class AB

Class D

Input sensitivity

0.2~5V

 0.15~5V  0.15~5V

0.15~5V

 0.2~6V

SNR (Signal to Noise Ratio)

>92DB

 >92DB  >92DB

>92DB

 >101DB

 

 

RMS(THD= 1% )

4 * 60 W/ 4Ω(14.4v)

2*78W/ 2Ω(14.4v)

4 * 40 W/ 4Ω(14.4v)

4 * 60 W/ 2Ω(14.4v)

4 * 60 W/ 4Ω(14.4v)

4*80W/ 2Ω(14.4v)

4 * 80 W/ 4Ω(14.4v)

4 * 90 W/ 2Ω(14.4v)

 1 * 200 W/ 4Ω(14.4v)

1*350W/ 2Ω(14.4v)

2*500W/ 1Ω(14.4v)

Frequency Range(-3 DB)

15 HZ~ 60 KHZ 

15 HZ~ 40 KHZ 15 HZ~ 40 KHZ 15 HZ~ 40 KHZ 10 HZ~ 320 HZ

Low pass frequency(-3 DB)

50 HZ~ 250 HZ

20 HZ~ 250 HZ 20 HZ~ 250 HZ 20 HZ~ 250 HZ 30 HZ~ 250 HZ

High-pass frequency(-3 DB)

15 HZ~ 3KHZ

20 HZ~ 250 HZ 20HZ~250HZ 20 HZ~ 250 HZ NA

Bass boost(-3 DB)

0 ~ 12 DB 

0 ~ 12 DB 0 ~ 12 DB 0 ~ 12 DB 0 ~ 12 DB

Subbass frequency

NA

NA NA NA 30HZ~250HZ

Fuse

30A*1

30A*1 30A*2 30A*2 30A*2

THD (total harmonic distortion)

<0.01% 

<0.01% <0.01% <0.01% <0.01%

 

Power supply

14.4V(9V~15V) Negative ground 14.4V(9V~15V) Negative ground  14.4V(9V~15V) Negative ground  14.4V(9V~15V) Negative ground  14.4V(9V~15V) Negative ground 

Size

200*230*50mm 

295*230*50mm 318*230*50mm 340*230*50mm 318*230*50mm

Weight

1.35Kg 

1.93Kg 2.12Kg 2.27Kg 2.07Kg

SUOER CA series 4 channels

Put your music into high gear and take off with the Stage  Class A/B 4 Channel Full Range Amplifier. 
With 1500 Watts Max Power and MOSFET power supply, this Amplifier is ideal for your entire audio system. It can power up your speakers, subwoofers or a combination of both. Customize the sound with Variable Low Pass Crossover, Variable High Pass Crossover and Variable Bass Boost. Bridge the channels for more power and flexibility. Both low and high level inputs are available so that if your receiver does not have one, it will have the other.
Short Protection
Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.
Switchable Input Sensitivity
Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.
 12v 2/4 channel power amplifier car audio

●Power - 1500 Watts Max x 4 @4-Ohms,900 Watts Max x 4 @2-Ohms, 1120 Watts Max x 2 Bridged @4 Ohms;
●Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal;
●Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers;
●Mosfet Power Supply - A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry;
●Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier;
●Variable BASS Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s);
●Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels;
●Specs - Dimensions: 318mmx 230mm x 50mm, Weight: 2.12Kg.



FAQ
Q:Are you manufacturer or trading company?

A:We are manufacturer located in Foshan,Guangdong province,covering a land area of 20,000square meters, with standard workshop, advanced production equipment and world-leading facilities.

Q: What is your advantage?

A: We  develop  a  powerful R&D team to ensure the innovation and strict inspection process in workshop to ensure the quality.

Q: What is your MOQ?

A: No quantity requirement on Suoer logo,for customized Logo(ODM/OEM)based on 300 pcs each model.

Q: Can I take a sample to test before bulk order?

A: Yes of course,and customer is responsible for the sample charges and shipping cost.

Q: How long will the sample be available?

A: In 7 days after full payment be done.

Q: What's your payment terms on mass order?

A: 30% deposit and balanced be paid before loading;for customized Logo 50% as deposit.



Online
Consulting

Contact us QQ QQ Wechat Whatsapp